Air Sand

Working with Car’s Body – Sanding

A lot of prep work is involved in painting a vehicle, one of the most important tasks is sanding. It helps the vehicle in preventing rough and uneven paint. This is a challenging task. An auto repair shop will usually do this task but if you are intending to save money by going DIY style, then a good foundation for the paint has to be ensured by learning to sand a car in a proper manner. Follow the directions.

Materials Needed
-    Sander pad
-    Power sander
-    Sand paper (#120, #320, #200 and #600 Grit)
-    Air compressor
-    Dry cloth
-    Wood block

Directions
Every spot of the car where the primer is to be applied should be properly sanded. This is important for ensuring a smooth surface. If the car is in a fairly good condition, then there is no need for sanding down the bare metal because this is only recommended for cars having rust.

Those who already know to sand a car, they would have to remove all the external plastic and foam parts from the body. This will help to make the sanding much easier preventing the parts from suffering damages during the process. Removing the running, head and tail lights are also important. If you are nervous about any other parts like emblems and logos that can’t be removed, then the better option is cover them with tape.

For removal of rust, hard scratches and other materials that ruin the car’s surface, a good option is to use a power sander. Sanding should be done in a straight motion, doing it in a circular motion is not recommended because it will show sanding marks through the final finish that no one wants. Line it with a back-and-forth motion for prevention of scratches. If there is a lot of surface damage or rust, then sander pads will be required. For having a safe environment during the sanding task, it is recommended to always wear dust mask and safety goggles to prevent respiratory distress or other injuries. It is recommended to work in a well-ventilated area.

For removing other dirt on the surface and the dust produced by sanding, use an air compressor. It is helpful in doing a thorough cleaning as the air reaches deep into the small spaces that traps dust particles that will possibly interfere during the final finishing.

The final part of sanding is the most physical. Wrap 120-grit sandpaper around a wooden block and move over less accessible areas and any of the areas that could have been possibly missed by the sander. Do the sanding in a straight line. Use 200-grit sandpaper for removing fine scratches, then use 320-grit and 600-grit sandpaper for giving a good smooth finish. Air compressor would have to be used for removing any dust produced. Use a dry cloth to wipe the surface clean before closely examining the body. Now, sand and use air compressor for removing the dust until you are completely satisfied with the work.

Tips and Precautions
-    Do the sanding job of the car in a well-ventilated area.
-    Always wear a protective gear like goggles and dust mask while doing the work.
-    Make sure to sand straight, this will prevent scratches.
-    Thoroughly sanding a car can take a few days.

Watts Premier 531130 Filter-Pure UF-3 3-Stage Water Filtration System $133.00 The Watts Premier Filter-Pure UF-3 Water Filtration Device utilizes three-stage filtration to ensure you get cleaner, healthier drinking water straight from the tap. In addition to reducing lead, chemicals, and chlorine taste and odor, the UF-3 uses Hollow-Fiber technology to trap and remove even the tiniest particles from your water. Featuring a patented space-saving design that is perfect for ho…

CQE-WH-01101 6 Stage whole house water filter system (provides 80,000 gal) $159.20 Crystal Quest 6 Stage Whole House Water Filter System Tired of bad tasting water, or worried about what might be in your drinking water? Well we have the solution for you! The Crystal Quest 20″ 6 stage whole house water filter. This filter system filters out hundreds of contaminants from your water, with its 6 stage filtration system. In the first stage the water filters through a 1 micron filter …

CHEFSKIN REG Digital Camo Camouflage REGULAR L Chef Jacket Long Sleeve, Covered Buttons, Roll-up Sleeves, Thermometer Pocket, Original Twill Fabric Digital Camouflage and get a FREE beanie hat in matching camo fabric included $39.90 NEW CAMO DIGITAL CHEF JACKET, TWILL, COVERED BUTTONS, ROLL-UP SLEEVES, THERMOMETER POCKET, BEAUTIFUL ORGINAL CHEFSKIN, SIZE REGULAR 50 INCHES CHEST and get a FREE beanie hat in matching camo fabric included…

A New Journey $6.99 Second only to Riverdance as an international Irish showbiz phenomenon, previous installments of this Platinum-selling extravaganza have become beloved PBS standards. The original buxom quartet of female singers, Lisa, Maev, Orla, and Chloe, have duly been joined by Hayley and are, as usual, backed by a full symphony orchestra and choir, plus enough traditional instruments (the house fiddler, Mai…

Jerry Goldsmith: 40 Years of Film Music $18.92 All products are BRAND NEW and factory sealed. Fast shipping and 100% Satisfaction Guaranteed….

The Film Music of Jerry Goldsmith $6.99 All products are BRAND NEW and factory sealed. Fast shipping and 100% Satisfaction Guaranteed….

Mchale’s Navy Joins Air Force [VHS] $14.98 …

Battle History of the U.s. Air Force Volume:2 Air Wars Hot and Cold/Over the Jungles, Over the Sands $3.78 …

Beyond the Sands of Kitty Hawk [VHS] $14.99 …

3M 8511 Particulate Sanding Respirator N95 with Valve, 10-Pack $13.05 Uniquely designed to help provide comfortable, reliable worker protection. Ideally suited for work settings that involve heat, humidity or long periods of wear. Workplace applications include grinding, sanding, sweeping, bagging and other dusty/hot operations. Features the 3M Cool Flow Exhalation Valve and adjustable M-noseclip to help provide a custom fit and secure seal….